Step 2
Open up the metal stand (4)
and lock in the screw (5).
Assembly
Fig. A
Lock the cap.
Find the male and female connections.
Insert the male connection into the
female connection.
4
Step 1
1.
3.
5.
4.
Disassembly and storage
2.
Gently lift off each section of the tree.
Care and use
1.
Before using or re-using the tree, inspect the product carefully. If there are any damaged parts or exposed sharp points, please dispose of the tree.
2.
Do not dip in water.
3.
Do not use solvent to clean.
Disposal and recycling
Unplug the transformer from the mains socket and remove all decorations from the tree.
Unplug the light strings from the transformer.
To shape your tree, pull down
the tree tips and adjust the
branches to fill any gaps.
Step 3
Assembly complete
- Combination
- Waves
- Sequential
- Slow glow
- Chasing/flash
- Slow fade
- Twinkle/flash
- Steady on
8 lighting functions
Carefully place the tree in its box and tape it shut.
STORE THE PRODUCT IN A COOL AND DRY LOCATION, AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40°C.
Electrical products are labelled with the wheelie bin symbol to indicate that they are to be collected and recycled at end of life. Users of electrical products should
not dispose of them as unsorted municipal waste but use the separate collection facilities available. Check with your local authority for recycling advice. Customer
participation is encouraged to minimise any potential effects on the environment and human health, from the potential presence of hazardous substances.
1
2
3
Insert the bottom tree section (3) into the metal
stand (4) first, then tighten the screw (5). Insert
the middle and top tree sections (2 & 1). Connect
the light chains (see illustration Fig. A) and plug the
transformer (6) into the wall socket.
Before storage, please repack the product as follows, to avoid damage:
