4
Assembly Instructions
Step 1
Position and connect
the units
a:
Before connecting the
units you will fi rst need to
remove all doors.
Loosen but do not
remove bolt B in the
centre of the hinge back
plates which are attached
to the wardrobe side
panel.
Slide the door off the
back plates allowing bolt
B to go through the key
hole.
b:
Position the double
wardrobe
1
in the
required position [please
note it will be hard to
move once connected].
Once in place position
the single wardrobe
2
along side so the the
front edges are aligned.
To fi x the two units
together you will need
two 18mm connecting
bolts
F
and two
Threaded sleeves
G
.
Thread 18mm connecting
bolt
F
through the
top hole inside the
double wardrobe then
screw threaded sleeve
G
through from inside
single wadrobe.
Repeat for bottom hole
A
A
B
C
F
G
a:
b:
1
2
WARNING:
Help may be
required for this step.
