FIRST USE
USE
1. Open the lid and fill the water tank with cold drinking water.
2. Place the filter holder (5) at an angle on the support ring (6) so
that the lugs (7) fit into the holes in the support ring.
3. Put a 1x4 coffee filter in the filter holder or place the permanent
filter.
4. Put ground coffee in the filter. As an indication, use one level
measuring spoon per 3 cups of coffee. This can be adjusted
according to taste.
5. Fill the water tank with the required amount of water; see the
measure marks on the water tank and the glass pot.
6. Place the glass pot on het hot plate.
7. Select the desired hot plate setting with switch 2.
8. Plug in the appliance and power on with switch 1.
NOTE
: The brewing process can be interrupted any time by simply
turning off the switch. The light will then go out.
NOTE
: The device is equipped with a so-called pause-and-pour
function.
NOTE
: Do not fill beyond the maximum mark on the tank. The
machine can make 10 large or 12 small cups of coffee at a time.
Check that all accessories are complete and the unit is not
damaged. Fill the water tank to the maximum level on the water
gauge and brew water several times without coffee grounds,
discarding the water each time. Clean and dry all detachable parts
thoroughly according to the section “CLEANING AND MAINTENANCE”.
2. Selection switch for the hot plate with the settings “half” and “full”.
3. 1x4 coffee filter (not included)
4. Permanent filter
5. Filter holder
6. Support ring with holes for attaching the filter holder
7. Lugs for attaching the filter holder
8. 1.25 l glass pot
9. Dust lid for the water tank
07
