HOMEAIDE Easy Air Mini NI-50, Инструкция по эксплуатации

Страница: 5 / 16

Note : Prior to initial operation,the nasal irrigation bottle and air tube should be
thoroughly cleaned.
1.
Place your nasal irrigation bottle on a flat and stable surface.Be sure easily
reach the controls when you are seated.
2. Gently twist the top part of the nasal irrigation bottle counter-clockwise to
disassemb disassemble.
3. Fill the bottom section of the nasal irrigation bottle with the medication
prescribed by your physician.
（
medication not included with unit.
）
4. Gently twist the top part clockwise to assemble the nasal irrigation bottle. Be -
sure the two sections fit well.
5. Attach one end of air tube to the base of the nasal irrigation bottle .
6. Attach the other end of air tube to the air tube connector located on the front of
the compressor.
7. Plug the power adapter into an appropriate electrical outlet. Make sure
at this stage,the power switch is at “OFF”status.
8. Press power switch to begin your prescribed operation.
9. To perform nasal irrigation
，
you will flush your nasal cavity by pushing
water through one nostril. The water will go behind the nasal septum
and come out the other nostril.
NOTE: While performing nasal irrigation
，
you'll have to tip your head
forward and away from the nostril where you are applying the solution.
Parental supervision requie for children under 13 years of age.
10. After using, rinse the nasal irrigation bottle with clean water and spray the liquid in
the bottle to avoid blocking the spray head.
3
4.OPERATING YOUR NASAL IRRIGATOR