Home NB-10001W, Инструкция по эксплуатации

Страница: 5 / 32

5
ENGLISH
CAUTION:
Do not mix hot liquid in a blender! May cause popping out of the
glasses.
ASSEMBLY PULSE
Fig. 1 Fig. 2 Fig. 3 Fig. 4
SAFETY BLOCKING
1. Do not blend ingredients for more than 10 seconds. A motor should not work continuously
for more than 60 seconds. After that, it is necessary to break it 2 minutes before you
reactivate it.
2. If the blender suddenly stops working, probably the safety blocking has been activated.
The system is designed to automatically block the engine while working under load and
thus protect it.
3. Remove the glass from the motor housing and allow the appliance to rest at least 30
minutes.
4. To avoid safety blocking, take care of time of continuous engine operation as well as the
quantity and weight of the ingredients that you blend.
5. Take into account the label for the maximum fullness of the glass is usually sufficient to
prevent excessive load on the motor. However, some particular thick combination of
ingredients may still cause a great load. If you notice that a load is high, reduce the amount
of ingredients in the glass and add more fluid for density thinning.
REMOVAL
Fig. 5