8
• Remove the tape of the drawers, balconies, egg tray, and the drain tube plug. Clean the inside of
the refrigerator.
• Refrain from slamming the drawerrs, bottle guards, and shelves to avoid breakage.
• Refrain from frequently opening the door.
• Keep the combination of drawers, baskets and shelves of the refrigerator in their intended places.
INSTALLATION
1. Choose a location where it is not exposed to sunlight, heat source or humidity,
as humidity may cause stain.
2. Pull out the bottom panel before installation.
3. Make sure the refrigerator is placed in a well-ventilated, indoor environment on
flat, sturdy ground (turning the leveling legs clockwise to raise the appliance,
and counter-clockwise to lower the appliance). Put a sheet under the appliance
to isolate the heat emission if it is located onto a carpet.
4.
Make sure the leveling legs are clung to the floor. Tilt the appliance slightly to
the back to keep the doors closed tightly.
Operating Instructions
PARTS DESCRIPTION
1.
Freezer shelf
2. Lamp and temperature
control knob
3. Lamp switch
4. Glass shelf
5. Drain tube plug
6. Crisper glass cover
7. Vegetable crisper
8. Middle bottle guard
9. Big bottle guard
11.8inch
2inch
2inch