Home HME030239N Скачать руководство пользователя страница 6

10

11

OPERATING INSTRUCTIONS

OPERATION

brackets onto if the stud position is too wide (Fig. 1).

3. Install the Wall Hanging Hooks as shown in Fig. 2. 

4. Align hanging hooks and fasten screws tightly. 
5. Install the exhaust pipe as shown in Fig. 3. (Align the 

Exhaust pipe to the Exhaust Vent and turn Clockwise) 

6. The exhaust vent can be locked into the position that 

best fits your needs. (Upper left, Upper right, low left and 

low right). 
7. Use the screws provided to fix the 2 Wall Hanging 

Brackets as per Fig 4. 

8. With assistance, mount dryer on wall bracket as per Fig 5.

The appliance shall not be exhausted into a chimney, a wall, 

a ceiling, an attic, a crawl space, or a concealed space of a 

building. Only rigid or flexible metal duct shall be used for 

exhausting. In the United States, only those foil-type flexible 

ducts, specifically identified for use with the appliance 

by the manufacturer and that comply with the outline for 

Clothes Dryer Transition Duct, Subject 2158A, shall be used. 

The total length of flexible metal duct shall not exceed 2.4m 

(7.9 feet). The duct shall not be assembled with screws or 

other fastening means that extend into the duct and catch 

lint. 
Your dryer is shipped with the legs. To install and adjust the 

leveling legs see the illustration below.

 

If the floor is uneven, adjust the height level of the legs 

accordingly. Do not insert pieces of wood, or any other 

objects under the legs.
Place the dryer on a sturdy flat surface. If the dryer is 

placed on an uneven or weak surface, noise or vibration will 

occur. 

INSTALLATION INSTRUCTIONS

CONTROL PANEL

COOL DOWN

HEAT DRY
AIR DRY

TIMER (MIN)

OFF

20

40

60

80

100

120

140

160

180

200

OFF

20

40

60

80

AUTO

TIMER

Air Dry

: This function runs with cool air, primarily to air items that require freshening i.e.: clothes that have been stored for 

a long period of time.  

Off

: When the 'Drying Timer' dial is in the 'Off' position no power is supplied 

to the unit. As soon as the dial is turned clockwise to the desired program 

the dryer will start.  

Hot

: For drying large quantities or bulky items (drum is more than 1/2 full), 

set the timer for more than 120 minutes.

Off

: When the 'Drying Timer' dial is in the 'Off' position no power is supplied 

to the unit. As soon as the dial is turned clockwise to the desired program 

the dryer will start.

Cool

: This function is generally used to cool the items that have just been 

dried. This generates cool air and helps prevent creasing. 

Anti-wrinkle

: This is used for items that are difficult to iron i.e.: cotton 

shirts and linen. Set the drying timer knob between 30-60 minutes 

depending on the amount of items in the dryer. Once the timer stops 

(including the Cool program) the items will contain some moisture

making 

the ironing process easier. 

Warm

: This function will dry and cool items and in most cases leave items 

wrinkle free (depending on material). Set the timer between 60-120 minutes.

AUTO 

This mode is an extended low heat dry cycle or energy efficient mode which will tumble dry the 

clothes in air dry mode to slowly dry and then activate the full heat at the end of the cycle. Use this 

mode for items that do not require immediate use. Total cycle time is approximately 200 minutes.
When the selector button is up, the dryer works at automatic drying mode. Please set the timer to 

200 minutes and it will start drying process till the moisture reaches setting degree. Then the dryer 

will cut off the heating function inside and terminate the drying automatically. However the wrinkle 

guard process will continue to work till the timer runs to “OFF” position.
Note: For heavy items like jeans, blankets, covers, towels, etc., the recommended mode is Timer.

TIMER

This mode is for high heat drying for immediate use. Select this mode for faster drying, select TIMER by pushing the 

selector button inward and set the appropriate dry time. Keep in mind, timed dry is at HIGH HEAT for the duration of the 

cycle until the time selected has elapsed.
When the selector button is pressed down, the dryer will work under timer controlled mode. Set the timer with the 

following references:
Note: Load weights and respective drying times are approximate.

Drying load

Time needed

3 Lbs

30 minutes

5 Lbs

60 minutes

7 Lbs

120 minutes

9 Lbs

200 minutes

AUTO

TIMER

Содержание HME030239N










Отзывы: