
Ready?
Follow this step-by-step guide
Step 1: Lift the chair and lay it gently on its back onto a clean surface.
Step 2: Feet and Hardware are located inside the bottom of the chair, open the zipper to access
the package.
Step 3: Place the plastic washer on the thread of the front feet and then insert into the base of the chair by
turning the leg clockwise by hand until tight.
Step 4: Apply self-adhesive felt pads to the bottom of each leg.
Step 5: Place the plastic washer on the thread of the back feet and then insert into the base of the chair by
turning the leg clockwise by hand until tight.
Step 6: To secure the back feet insert a screw in the hole at the back of the foot and screw into the frame using a
phillips screwdriver.
Step 7: Lift the sofa upright and place in desired location, avoid using the feet as a lever to prevent
breaking them.
TOP TIP
It is recommended that two people lift and tilt the chair in the correct position to
assemble the legs.
3
Feet Assembly Chair