1.Fix the Mounting bar (Part B) installation hole with junction box holes
by Mounting screws (Part H, choose one group of suitable Mounting
screws) as Figure 1, the screws are included in hardware pack.
Note: For the best performance, install fixture at 8 feet ~12 feet
(2.4~3.6m) above the ground.
3. Install the light on the Eva gasket (Part C) and bracket by Tie bolt
(Part G) and Rubber ring (Part E).
4. Cover the tie bolt using the screw cap (Part D). Use waterproof
glue to seal the rear cover and the light to make sure the lamp
waterproof.
2. Connect the source wires from the light and junction box through
the Eva gasket (Part C) as Figure 2
Conect the white wire to white by Wire nuts (F)
Conect the black wire to black by Wire nuts (F)
Connect the yellow/green wire of light to yellow/green wire from
junction box using ground screw (green) onto the bracket
Note:
DO NOT connect electricity before installation and maintenance
DO NOT cut or remove any connectors on the wire to make sure the
positive and negative connection is correct.
(888) 782-5618
HOW TO INSTALL
Twin-Head Dusk to Dawn Security Light
Model No. ES06529V
s e c u r i t y
www.homezonesecurity.com
Figure 1
Figure 4
Figure 2
Black
White
L
N
Waterproof glue
Rubber Screw Cap
Figure 3
Black
WhiteL
N
Tie Bolt Rubber Ring
