Assembly Instructions
2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
STEP 1
Remove the drawers, then place Top unit (A) upside down on a soft cloth.
STEP 2
Attach Legs (B) and Legs (C) to Top Unit (A) with Wood Screws
and Head Cap Bolts (long).
Tighten all Bolts only half way with Hex Wrench.
(See fi gure 1)
A
A
B
B
C
C
Figure 1
/4
Wood Screw
Head Cap Bolt (long)
