HOW TO FOLD UP FOR STORAGE OR TRANSPORT
HOW TO UNFOLD
Unfold rear stabilizer (refer to folding procedure), pull pin on seat rail folding mechanism and lower seat rail. Refer to
procedure below to set up as recumbent bike or rower.
SETTING UP AS RECUMBENT BIKE OR ROWER
PULSE
Hand grip pulse indicators can be found on the silver panels on the hand rails. Both hands must be on the grips at the
same time. The readings may not appear right away and will not be 100% accurate. The readings however, can be
used as a guide.
TROUBLESHOOTING
While your equipment has been checked and cleaned prior to being hired, problems can sometimes arise, especially if
you have had the unit for a long period of time.
Call your hire agent if you have any difficulty using the equipment.
BIKE MODE
:
unscrew levelling feet anti-
clockwise to stabilise bike
ROWER MODE
:
turn levelling feet
clockwise so that they do not make
contact with floor
BIKE MODE
:
Set seat to
desired position on seat rail,
and insert seat adjuster knob
by turning it clockwise
BIKE MODE
: Insert rower
handle in cradle below
computer
ROWER MODE
:
remove seat
adjuster knob by turning it
anti-clockwise until
completely out. Store knob in
a safe place
Move seat backward to
furthest position & turn
adjuster know clockwise to
lock
Pull pin on folding
mechanism, raise seat rail
until pin locks into place
Fold away rear
stabiliser & lock
into position with
lock pin
www.homefitnesshire.com.au
