- 14 -
Electrical Supply Circuit Requirements
Plan the location of the appliance so that it will have adequate electric power. A 15
AMP, 60Hz circuit is required for 120V installation. The appliance should ideally be
located close to a suitable main socket to enable power connection.
The power cord is 6ft long and locates on the right side of the unit. Avoid the use of an
extension cord as it may overheat and cause a risk of fire. However, if an extension cord
MUST be used, the cord must be No. 14AWG minimum size and rated not less than 1,875
watts. The extension cord must be a 3-prong cord with grounding type plug and cord
connection. and it should not be longer than 7ft and 10 31/64”.
Always make sure the outlet is in good condition and the plug is not loose.
NEVER
exceed the maximum amperage of the circuit.
NOTE:
This model can
NOT
be hard wired.
THE PLUG MUST BE PLUGGED VERY TIGHTLY. DO NOT plug other appliances on
to the same circuit.
Read and understand this entire owner's manual,including all safety
information, before plugging in or using this product. Failure to do so could
result in electric shock, fire, serious injury, or death.
WARNING! Do not operate the unit if it is damaged or has malfunctioned. If
you suspect the unit is damaged,call a qualified service technician to inspect
and replace any part of the electrical system if necessary.
5. OPERATING INSTRUCTIONS
Содержание ZHX-36-027
Страница 2: ......
