Home Depot F210004-B2 Скачать руководство пользователя страница 3

IMPORTANT SAFETY INFORMATION ABOUT

PROPANE (LP) GAS

The LP-gas supply cylinder to be used must be constructed and marked in accordance with the U.S. Deparment 

of Transportation (D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and Tubes 

for Transportation of Dangerous Goods and Commission, CAN/CSA-B339, as applicable.

The LP-gas supply cylinder to be used must have a listed overfilling prevention device (See Figure 1).

The LP-gas supply cylinder to be used must have a cylinder connection device compatible with the connection for 

the appliance.

A self-contained LP-gas cylinder for use with this appliance must have a capacity of 20 Ibs cylinder (Height 

approximately 18 in., Tank Body approximately 12 in. diameter, Base approximately 8 in. diameter).

The cylinder supply system must be arranged for vapor withdrawl.

The cylinder used must include a collar to protect the cylinder valve.

This appliance shall be used only outdoors in a well-ventilated space and shall not be used in a building, garage 

or any other enclosed space.

When this appliance is not in use, the gas must be turned off at the supply cylinder.

Storage of this appliance indoors is permissible only if the cylinder is disconnected and removed from the appli-

ance.

Cylinders must be stored outdoors in a well-ventilated area out of the reach of children. Disconnected cylinders 

must have threaded valve plugs tightly installed and must not be stored in a building, garage or anyother 

enclosed areas.

This appliance is certified by CSA (Canadian Standards Association) to ANS Z21.97  CSA 2.41-2017, Outdoor 

Decorative Gas Appliances.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

WARNING:

 

THIS PRODUCT CAN EXPOSE YOU TO 

CHEMICALS INCLUDING CHROMIUM (HEXAVALENT 

COMPOUNDS) AND BENZENE, WHICH ARE KNOWN TO THE 

STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH 

DEFECTS OR OTHER REPRODUCTIVE HARM. 

For more information go to:

www.P65warnings.ca.gov/furniture.  

Standard 20 Ib.tank

Figure 1

Rated Heat Input (Liquid Propane)

Propane Regulator Pressure
Clearance to combustible surfaces

40,000 BTU/hr

11 inches water column
Sides: 24in. (610mm), Top: 72in. (1829mm)

03

SPECIFICATIONS 

Содержание F210004-B2













Отзывы: