7
Making the electrical connections
If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
□
Disconnect the power and remove the existing wall plate and switch from the wall outlet box.
□
Set the knob on the wall switch (K) to the 0 position.
□
Make wire connections as follows, using the wire nuts (II).
a.
Speed/oscillation control wire connection
•
If your wall outlet box (HHH) has a ground wire (green or bare copper), connect the speed/oscillation control's
yellow/green ground wire (GGG) to it; otherwise connect the speed/oscillation control's yellow/green ground wire
directly to one of the screws from the wall outlet box (HHH).
•
Dash lines are 3-conductor cables between ceiling and wall outlet box.
CONNECT
(From speed/oscillation switch)
Blue wire (FOR OSCILLATION) (FFF)
Black wire (TO MOTOR L) (EEE)
Black/white wire (AC IN L) (DDD)
Yellow/green ground wire (GGG)
TO
(From wall outlet box)
Blue or red wire (CCC)
White wire (BBB)
Black wire from A/C supply source (AAA)
Outlet box green wire
Assembly — Hanging the Fan (continued)
QQ RR SS
WARNING:
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
NOTE:
Installation of this fan requires that a three-conductor cable with ground wire be run between ceiling and wall outlet box (HHH), or the
oscillating feature will not work.
b.
Fan wire connection
CONNECT
(From fan)
Blue fan wire (TT)
Black fan wire (UU)
White wire (VV)
Green wire (WW)
TO
(Conductor cable between ceiling and wall outlet box)
Blue or red wire (CCC)
White wire (BBB)
White wire from A/C supply source (RR)
Ground conductor of 120V supply, it may be a bare
wire or a wire with green colored insulation. (SS)
CCC
FFF
NN
K
F
GGG
HHH
AAA
EEE
DDD
AAA
BBB
BBB
CCC
TT UU VV WW
10