Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No.: 15548
Page #11 of 16
Assembly Instructions
21.
Align and attach Magnetism mass (19) to Front Stretcher (P) using four M3x16 mm Pan Head Screws (20)
through holes on Magnetism mass into the pilot holes, as shown in figure below.
22.
Lay the Shelf Panel (B) and Tray Panel (N) on a scratch free surface. Align and attach Slide Tracks of 16”
3-packed Slide (17) to Shelf Panel (B) using three M3.5x12 mm Flat Head Screws (7) through holes on
Slide Track into the pilot holes, Repeat the same procedure to attach the Slide Runners of 16” 3-packed
Slide (17) to Tray Panel (N), as shown in figure below. Make sure the Slide Tracks and Runners are
properly aligned with the pilot holes and Slide runner opening facing backward.
23.
Turn the Shelf Panel (B) over , Align and attach Steel Tube (Y) to Shelf Panel (B) using three #8x7/8” Pan
Head Screw (25) through holes on Steel Tube into the pilot holes,
24.
Insert the Tray Handle (21) into the pre-drilled small holes on front side of Tray Panel (N) as shown.
UP
7
Release
Lever
17
Slide Runner
Slide Runner opening
facing backward
Slide Track
7
B
N
21
20
19
P
B
25
Y
