Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No.: 15548
Page #2 of 3
Parts List
Please read completely through the instructions and verify that all parts listed are present before
beginning assembly.
A-Holder (x 1)
Hardware List
Please read completely through the instructions and verify that all hardware listed are present
before beginning assembly.
1- M4 x 16 mm Screw (x 4+1 extra)
Tools required (not provided): Rubber mallet, Phillips screwdriver,
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble
the unit on a carpeted floor or the empty carton to avoid any scratch.
2.
Set the Holder (A) at your desired height inside the tower. Secure the Holder (A) in place
by using four M4 x 16 mm Screws (1) in each. As shown in figure below.
1
A
WSMSL-SKW
WSMSL-SKN
(Sold Separately)
