background image

 

 

Table of Contents 

 

 

 

Table of Contents ............................................................... 2

 

Safety Information .............................................................. 2

 

Warranty ............................................................................ 2

 

Pre-Assembly ..................................................................... 2

 

Planning Assembly ....................................................................2

 

Tools required ...........................................................................2

 

Hardware Included ....................................................................3

 

Package Contents .....................................................................4

 

Assembly .......................................................................... 5

 

Care and Maintenance .......................................................16

 

 

Safety Information 

 

 
Please read and understand these instructions before assembling 
and using this console. Save these instructions for future reference. 

MAXIMUM RECOMMENDED WEIGHT LOADS 

 

WARNING: 

This unit is not intended for use with CRT TVs. Use only 

with  flat  panel  TVs  and  audio/video  equipment  meeting 
recommended size and weight limits. Never use with larger/heavier 
than recommended flat panel TVs or equipment. To avoid instability, 
place  flat  panel  TV  in  the  center  of  the  unit;  the  base  of  the 
television must be able to rest on the supporting surface of the 
unit  without  over-hanging  the  edges. Improperly  positioned flat 
panel  TVs,  or  flat  panel  TVs  or  other  equipment  that  exceed 
recommended size and weight limits could fall off or break the unit, 
causing possible serious injury.

 

 

 

 

 

   

 

Warranty 

 

 
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or fail under normal 
use, we will repair or replace it for a period of up to one (1) year from date of purchase.  

This warranty gives you specific rights and you may also have other rights which vary from state to state. 

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators. 

Pre-Assembly 

 

 

PLANNING ASSEMBLY 

Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product 
and contact the Customer Service Team at 1-800-986-3460. 

TOOLS REQUIRED 

 

 

Phillips 
screwdriver 
(not provided) 

 

 

 

 

 

 

Maximum load 22.6 kg / 50 lb 

Place TV behind the stopper 

Fits up to most 177.8 cm / 70 in. flat panel TVs 
Maximum load 61.2 kg / 135 lb 

Maximum load 6.8 kg / 15 lb 

Содержание WSFP60ECHD-19

















Отзывы: