4
Assembly
4
Applying the silicone
□
Wipe off the top edges of the vanity (A) that will be in
contact with the top using a clean rag.
Apply a layer of silicone along all of the top edges.
□
A
BB
1
Adhering the basin
2
3
Sealing the basin
□
Apply a layer of silicone on the underside of the top (B)
along the basin cutout, where the basin (C) will be in
contact.
Lower the basin (C) onto the top (B), lining it up with the
cutout.
Wipe away any excess silicone.
□
□
CAUTION:
Do not over tighten the screws as this
could crack the basin.
Securing the basin
□
Apply a bead of silicone sealant where the basin (C) meets
the top (B).
Use a clean rag to push in the silicone and wipe away
any excess.
□
AA
□
Position the brackets (BB) so they clamp the basin (C) edge
to the top (B).
Thread the screws (AA) through the spaces in the brackets
(BB), then through the anchor in the top (B).
Tighten the screws with a screwdriver, turning it clockwise.
□
□
B
B
C
C
B
C
Assembly
