Panel cannot be assembled
Make sure
5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-assembly (continued)
ASSEMBLY NOTE
Upon opening, thoroughly clean all wood surfaces to remove dust and dirt that may have settled onto the finish during
shipment. In order to prevent damage during assembly, Please assemble this item with at least two people.
NOTE: Turn the cam-bolt screws until they
are tight, the shoulder should be
against the surface of the part.
NOTE:The arrows on the hidden cam-locks should point to the cam-bolts.
TROUBLE SHOOTING
HOW TO USE THE CAM-TOOL
PROBLEMS
SOLUTIONS
Not all of the product’s legs
touch the floor
Make sure adjustable center feet levelers are adjusted properly. The levelers are pre
assembled on the bottom of the legs.
The product is KD construction. You may need to loosen the bolts and place the
product on a flat surface. Ensure that the legs all touch the flat surface and then re-
tighten the bolts.
Loosen all the bolts and apply some weight to the product to get all the feet to touch
the floor. Then re-tighten the bolts in that position.
panel is on right direction.
Door cannot be closed or
without magnetic function
Adjust the magnetic clamp make sure it is assembled on appropriate position.
Door is not flat
Adjust the magnetic clamp make sure it is assembled on appropriate position.
Drawers cannot pull in or
Pull out smoothly
Refer assembly instruction details to assemble drawers, and pull in and pull out
drawers several times gently.
Drawer cannot be removed
When removing the drawer, tip-up the safety release tab to remove the drawer from
the body.
Drawer cannot be assembled
Check if drawer two side boards are assembled backwards.
According to drawer assembly instruction step, Check if drawer two side boards are
assembled backwards.
BB
CC
