5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Pre-assembly
PLANNING ASSEMBLY
To ensure your installation goes smoothly, please read these instructions carefully and review the recommended tools
and hardware before you begin.
To remove the old vanity (if applicable): 1) Turn off the water supply and drain out. 2) Disconnect the supply lines from the
faucet.
3) Remove the old vanity top and vanity. If the new vanity is not installed immediately, temporarily stuff a rag into the
drain pipes.
Using a level locate any uneven floor and/ or wall areas where your vanity will be installed. Unevenness can cause your
vanity to become
misaligned resulting in twisting of the cabinet. Repair any uneven areas by reducing high spots or shimming low spots.
TOOLS REQUIRED
NOTE:
Tools are not included.
Safety
goggles
Sealant
Level
PACKAGE CONTENTS
A
B
Part
Description
Quantity
A
Vanity with top
1
B
Backsplash
1
