17
homeDepot.com/homeDecorators
please contact 1-800-986-3460 for further assistance.
press the uplights button on the remote control to change
the uplight between the four settings: white, blue,
white/blue, auto-cycling and off.
Operation
Operation (continued)
push the power button to supply power to all
functions of the fireplace and put the insert in a
standby mode.
push the power button again to turn off all functions.
press the timer button to cycle through the ten timer
settings (30 minutes, 1 hour, 2h, 3h, 4h, 5h, 6h,
7h, 8h and 9h) and the off setting.
1
3
2
6
powering the fireplace
adjusting the spectrafire flame
adjusting the heater
setting the timer
NOTE:
to change between °f and °c press and hold the
heater button on the control panel for 3 seconds.
NOTE:
holding the power button on the control panel for
10 seconds will disable the heater function.
NOTE:
all previous settings are held in memory, so the
next time you power up the fireplace, the unit will turn on
with the same settings.
there are 5 brightness levels that can be selected and off
(00)setting.
settings f5 - f1 decrease in brightness.
adjusting the sidelights
press the sidelights button on the remote control to change
the sidelight between the four settings: amber,
blue, blue/amber, auto-cycling and off.
adjusting the uplights
4
5
to set the thermostat use the heater button on the control
panel to select the desired temperature.
the thermostat setting range is 62°f - 82°f or 17°c - 27°c
or always on.
the thermostat is adjustable by 2°f or 1°c increments by
pressing the up or Down “ “ buttons on the remote
control.