Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No.: 15548
Page #6 of 9
Assembly Instructions
6.
Insert Wood Dowels (3) into the inner end holes of Top Panel (A), Shelf Panel (D),
Stretcher (F) ,Bottom Panel (E) . Tap in with a mallet, if necessary. Make sure you use a
small amount of glue with both ends of all dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
7.
Align the inserted Wood Dowels (3) on the Top Panel (A), Shelf Panel (D), Stretcher (F) ,
Bottom Panel (E) with the drilled holes on the Side Panel Left (B) and press them
together. Make sure that the raw edge on the Top Panel (A), Shelf Panel (D), Bottom
Panel (E), Side Panel Left (B) points towards the back of the unit and the Cam Lock
holes will face at the floor. As shown below. Fasten the Top Panel (A), Shelf Panel (D),
Stretcher (F), Bottom Panel (E) to the Side Panel Left (B) by engaging Cam Locks (1).
(Refer to page 3 on Cam Lock system operation supplement).
8.
Repeat the same procedure to attach the Side Panel Right (C) at the other end.
9.
Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are
tight and there are no gaps between the pieces. This will help keep the unit square.
1
1
3
B
A
D
E
C
F
