Installation
5
1
Attaching the mounting unit to the
junction box
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
Remove the four pre-assembled screws from the mounting
unit (AA).
2
NOTE:
The pre-installed support screws on the
mounting unit (AA) should protrude out away
from the junction box.
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the preinstalled
ground screw.
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (CC) and secure with electrical tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
3
Installing the light fixture
Secure the light fixture (A) to the junction box by placing
Secure the light fixture with four previously-removed screws.
the mounting bracket over the preinstalled support
screws on the mounting unit (AA).
AA
CAUTION:
To avoid any waterproofing problems, please
make sure the fixture fits the mounting surface perfectly
during installation and use silicone sealant around the fixture
for better sealing after installation.
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
CC
AA
BB
