HOMEDEPOT.COM
/HOMEDEPOT.CA/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
9
Securing the cabinet
7
Securing the cabinet
8
□
Drill pilot holes on the wall through the back of the
cabinet as well as the support bar at the marked
locations using ø1/8” (2.5mm) drill bit.
Assembly (continued)
□
Open the door, measure and mark two holes, one
of the holes must be right over the wall studs
respectively from the back of the cabinet. Make
sure the two holes avoid the existing screws behind
the cabinet at the indicated locations as shown
below.
ø1/8”
2.5mm
11-5/16’’ [287]
1-1/8’
’ [28]
1-1/8’
’ [28]
4-3/16’’ [106] 11-5/16’’ [287]
