6
Assembly (continued)
4
Backsplash Installation
□
To mount the backsplash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of
the backsplash (C). Position backsplash (C) as shown onto vanity top (A) and against the wall. Clean any excess silicone compound before
allowing to dry.
5
Hinge Adjustment For Door Alignment
□
If the doors preassembled to vanity base (B) require adjustment, follow the below options as needed:
□
To adjust door up or down, loosen screws (a), adjust door and retighten screws.
□
To adjust door left and right, turn screw (b) in or out.
□
To adjust door in and out, loosen screw (c), adjust door and retighten screw.
A
Silicone
B
C
