6
Assembly (Continued)
4
Assembly Pedestal to Table
Top
□ Place Table Top (A) upside down on a soft surface
such as blanket or carpet to prevent it from being
scratched.
□ Place Pedestals (C)
which installed to Platform (B)
at step 1
into square block under Table Top (A).
□ Tighten Bolts (AA by Allen Key (BB) from Platform
(B) to Table Top (A).
NOTE:
Tight Slightly till all bolts are tidily in each
hole. Then tighten before turn Table over.
5
Assembly Completed
□ Turn over Table.
NOTE:
Adjust table level by adjusting bottom
levelers
AA
BB
AA
BB
A
B
C
D2
D1