6
3
Assembly Stretcher to Base
□ Locate Dowels (HH) into 2 drilled holes on base
as shown. In the meantime, screw up the
Threaded Rod (EE) manually into the center hole
as well.
(Reference Fig.3)
□ Make sure Dowels & Thread Rod are fitted well
and aligned between Base & Stretcher
(Reference Fig.4)
□ Assembly Stretcher (F) to Base (E) by slightly
tighten Thread Rod (EE), Half Mon Washer (DD)
and Hex Nuts (FF) with Wrench (GG) Provided.
(
Reference Fig.5)
□ Do same above steps for another end.
NOTE:
Tight Slightly till the whole base set in table
top bottom
E
D
C
C
D
E
F
Fig.3
Fig.4
Fig.5