4
REMEMBER
to turn off the power. Follow the
steps below to hang your fan properly.
Hanging the Fan
Remove the decorative canopy bottom cover
from the canopy by turning the cover counter
clockwise. (Figure 4)
Remove the mounting bracket from the canopy
by removing the 1 of 2 screws from the bottom
of the mounting bracket and loosening the
other one a half turn from the screw head.
Next, turn the canopy counter clockwise to
removing the mounting bracket from the
canopy. (Figure 4)
Remove the clevis pin, cotter pin and set
screws from the top of the motor assembly.
(Figure 5)
NOTE:
If a longer downrod is needed, take out
the screw located in the hanger ball (you need
to use the allen wrench to loosen your set
screw), lower the hanger ball and remove the
pin, remove all 3 pieces from the downrod and
assemble them onto the new longer downrod
before proceeding step 4. (The longer downrod
is available at any Home Depot store)
Route wires and safety cable exiting from the
top of the fan motor through the coupling
cover, canopy cover, canopy and then through
the ball/ downrod. (Figure 5)
1.
2.
3.
4.
WARNING
FAILURE TO PROPERLY INSTALL COTTER PIN
AS NOTED IN STEP 5 COULD RESULT IN FAN
LOOSENING AND POSSIBLY FALLING.
WARNING
THE FAN MOTOR ASSEMBLY IS SHIPPED WITH
A STOPPER TO PREVENT MOVEMENT DURING
TRANSPORTATION. DO NOT REMOVE THIS
STOPPER UNTIL INSTRUCTED TO DO SO IN
THIS MANUAL. (FIG. 5)
Tighten two set screws at top of the fan motor
collar. (Fig. 5)
6.
Align the holes at the bottom of the downrod
with the holes in the coupling on top of the
motor housing (Figure 5). Carefully insert the
clevis pin through the holes in the collar and
downrod. Be careful not to jam the clevis pin
against the wiring inside the downrod. Insert
the cotter pin through the hole near the end of
the clevis pin until it snaps into its locked
position, as noted in the circle inset of Fig. 5.
5.
Figure 4
Ceiling
Mounting
Bracket
Ceiling Canopy
Canopy Bottom
Cover
Figure 5
Motor Wires
Safety Cable
Ball/Downrod
Assembly
Ceiling Canopy
Stopper
Canopy Bottom
Cover
Coupling Cover
Clevis Pin
Cotter Pin
Set Screw
Pin in Locked
Positioon
