8
$'+(6,9(
Preparing the sink
Clean the bottom surface of the sink (B) to prepare for
bonding to the vanity top (E).
Make sure the sink (B) is completely dry before
applying adhesive (not included).
Apply a uniform bead of adhesive around the bottom
outer ring of the sink (B).
Be sure to follow the adhesive directions.
8
$'+(6,9(
Installation (continued)
Prepare the vanity top (E) for bonding to the vanity
(A) by cleaning the top surface of the vanity (A).
Make sure the vanity (A) is completely dry.
Apply proper adhesive bead (not included) on the
top surface of the vanity (A).
Be sure to follow adhesive instructions.
Carefully lower the vanity top (E) onto the vanity (A).
The vanity top (E) should be pushed all the way
back until it contacts the wall.
Allow adhesive to dry completely before continuing
assembly.
7
Attaching the vanity top to
the vanity
B
E
A
WARNING:
It is recommended two
adults handle the stone top to prevent
personal injury or damage to the stone.
