11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Accessories
Attaching the fan blades
Attaching the switch cup adaptor
6
1
□
Attach blade (G) to blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(G) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (G).
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades.
□
Remove one screw (QQ) from the black bracket below the
fan motor assembly (D). Loosen, but do not remove the
other two screws (RR).
□
Align the key hole slots in the switch cup adaptor (H) with
the two screws (RR) in the black bracket.
□
Turn the switch cup adaptor (H) clockwise until the two
screws (RR) are situated in the narrow end of the keyholes.
□
Re-install the one screw (QQ) that was removed in first
step. Tighten all three screws firmly
.
D
AA
G
CC
J
H
D
RR
Assembly - Hanging the Fan (continued)
Attaching the switch cup
2
□
Remove one screw (UU) from the switch cup adaptor (H).
Loosen but do not remove the other two screws (UU).
□
Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
□
Aligning the “L” shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
□
Install the other screw (UU) that was removed in the first
step. Tighten all three screws (UU) securely.
E
NN
UU
H
D
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
IMPORTANT:
It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the switch
cup is connected to the fan.
