background image

13

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operating Your Fan and Remote Control

Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan. 

Speed setting for warm or cool weather depends on factors such as 
the room size, ceiling height, number of fans and so on.

The fan is shipped from the factory with the reversing switch (YY) 
positioned to circulate air downward. If airflow is desired in the 
opposite direction, turn your fan off and wait for the blades to stop 
turning, then slide the reversing switch (located on the top of the 
motor housing) to the opposite position, and turn the fan on again. The 
fan blades will turn in the opposite direction and reverse airflow.

Warm weather

 - (Forward) A downward airflow creates a cooling effect.

This allows you to set your air conditioner on a higher setting without
affecting your comfort.

Cool weather

 - (Reverse) An upward airflow moves warm air off of the

ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.

A. Warm weather

B. Cool weather

Operating Your Fan and Remote Control

YY

Power ON/OFF: Press and release the power button to turn the 
fan and light on or off.
Fan speed-LEDs on the fan speed button will illuminate to the 
corresponding speed.

Press and release 1 time- turns the fan on high speed.
Press and release 2 times- turns the fan on medium speed.
Press and release 3 times- turns the fan on low speed.
Press and release 4 times- turns the fan off.

Light ON/OFF

Press and release the button to turn the light on or off.
Press and hold the button to activate the dimmer function (as long as 
you have NOT previously set O/D dip switch in your remote to the “ON” 
position.

Correlated Color Temperature (CCT) 
changing

Press and release the button to turn the light to your desired color 
temperature.
Press and release 1 time- turns the light to 2700K in Warm White.
Press and release 2 times-turns the light to 3000K in Soft White.
Press and release 3 times-turns the light to 5000K in Daylight.

Содержание 51860
















Отзывы: