13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Lights
Attaching the light kit fitter assembly
1
Ƒ
Remove one screw (NN) from the round hole in the light kit
pan, and loosen, but do not remove the other two screws.
Ƒ
Connect the blue wire exiting the bottom of the fan motor
assembly (E) with the black wire from the top of the light kit
fitter assembly (I).
Ƒ
Connect the white wire exiting the bottom of the fan motor
assembly (E) with the white wire from the top of the light kit
fitter assembly (I).
Ƒ
Push the light kit fitter assembly (I) up to the light kit pan so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit fitter assembly (I) clockwise to secure.
Ƒ
Re-install the screw (NN) that was removed in step 1.
Ƒ
Make sure all the screws are firmly tightened.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE:
Notice the location of the fan’s slide switch. This is
the switch used to change the fan’s directional rotation.
For more information on the operation of this switch, see
Operating Your Fan and Remote Control on page 14.
E
I
NN
Installing the glass shade
2
Ƒ
Place the bowl (J) into the light kit pan (E), by aligning the
three flat areas on the top flange of the bowl (J) with the
three raised dimples in the light kit pan.
Ƒ
Turn the bowl clockwise until it stops.
CAUTION:
Make sure the power is off before attaching or
removing the glass shades.
WARNING:
Allow the glass shades to cool completely before
removing.
E
J