7
Installing tabletop
8
Installing gas tank and battery
5
Installing connecting rod
6
Installing U-type connector
8
Assembly (continued)
□
Use connecting rod (F) to connect the front panel (D) with the
back panel (A) together with bolts (DD) and gaskets (BB).
BB
DD
F
□
Use U-type connector (G) to connect the front panel (D) with the
back panel (A) together with bolts (DD) and gaskets (BB).
DD
BB
G
A
D
□
□
Place the tabletop (H) facing down on a non-abrasive surface.
Attach the tabletop (H) to the frame with bolts (EE)
and gaskets (FF).
EE
FF
H
□
□
□
□
□
With the help of other people, carefully turn the table over to an
upright position.
Position the liquid propane gas cylinder (not included) in the
circular ring (E) on the table door (D) and tighten 90 degrees
clockwise.
Connect the gas pipe to the liquid propane gas cylinder.
Hand tighten clockwise only.
To disconnect the gas pipe from liquid propane gas cylinder,
loosen the connector by turning it counterclockwise by hand.
Open battery cap on control panel and install
LR03 AAA batteries (not included).
D
E
