18
Operating Instructions (continued)
NOTE:
This may not exactly match the room thermostat reading as their sensors are located in different areas.
□
Hold down the FLAME SPEED ICON for 10 seconds to toggle between Fahrenheit and Celsius. “F” or “C” will be displayed
on the control panel (°F/°C can only be toggled from the control panel and will not work if using the remote control).
□
See HEATER OVERRIDE section to disengage the heater.
Sleep Timer Function (Remote Control Only)
□
The Sleep TIMER function will set a countdown to shut down the unit’s main power.
□
Press the TIMER ICON to display the current Sleep Timer setting.
□
Press the TIMER ICON again to scroll through the timer settings, which are: 30 (minutes), 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H, OF (OFF).
□
When the timer reaches zero, it will turn OFF the main power and will maintain all the settings in memory.
HEATER OVERRIDE
The power to the heater can be disengaged to prevent the heater from being accidentally or unintentionally powered on. This feature is
primarily added to help prevent children from powering on the heater when it is not desired.
NOTE:
The heater override can only be set from the control panel and will not work if using the remote control.
□
First turn the main power OFF. Press the POWER ICON; as the heater setting display is flashing, press the POWER ICON again and
long-hold 20 seconds. The E3 symbol will display to indicate that the heater is now disengaged.
NOTE:
The Flame and Timer functions will operate normally. Only the heater is disengaged.
□
Repeat the same process to re-engage the heater function. The E3 symbol will change back to display the heater setting when the
heater is re-engaged.
MEMORY FUNCTION
□
This unit has a memory function that allows you to turn off the MAIN POWER and retains all the other function settings (excluding the
SLEEP TIMER function).
□
To reset the memory, unplug the unit from the wall.
