background image

Warranty

4

The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the 
factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any 
glass), to be free from defects in workmanship and material present at time of shipment from the factory for a period of five years after 
the date of purchase by the original purchaser. The manufacturer also warrants that all other fan parts, excluding any glass or acrylic 
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the 
date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or 
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All 
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper 
installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not 
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give the longest 
useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a 
defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby 
disclaim any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent 
permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the 
express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to 
you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or 
performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential 
damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other 
rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a 
claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HOMEDEPOT.COM/HOMEDECORATORS

SPECIFICATIONS

SPECIFICATIONS

TOOLS REQUIRED

TOOLS REQUIRED

NOTE:

 These are approximate measures. They do not 

include amps and wattage used by the light kit.

Pre-Installation

Pre-Installation

25 in.

Low

Medium

High

120

Fan size

Fan size

Watts

Watts

RPM

RPM

CFM

CFM

Speed

Speed

Volts

Volts

Amps

Amps

4.96 cu. ft.

N.W.

N.W.

G.W.

G.W.

C.F.

C.F.

0.21

0.25

0.31

14.02

21.15

34.40

294

424

542

1046

1524

1941

8.1 kg

(17.82 lbs.)

11.22 kg

(24.7 lbs.)

Phillips 
screwdriver

Flat blade 
screwdriver

Step 
ladder

Wire 
stripper

Electrical 
tape

Adjustable 
wrench

Содержание 1005 711 209






















Отзывы: