WWW.HOMEDECORATORS.COM
Please contact 1-800-986-3460 for further assistance.
1
Mounting the hardware
Thread the fixture mounting screws (GG)
into the provided holes of the mounting
bracket (HH).
Thread the hex nuts (BB) onto the fixture
mounting screws (GG). Do not tighten the
hex nuts (BB) at this time.
Pull the supply wires out from the outlet
box and mount the mounting bracket (HH)
to the outlet box using the bracket
mounting screws (FF).
Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
mounting screws (GG).
Adjust the fixture mounting screws (GG)
until they protrude out from the back plate
1/4 in.
Remove the fixture body (A) and secure
the position of the fixture mounting screws
(GG) by tightening the hex nuts. (BB)
2
Assembling the fixture
Insert the shade screws (CC) into the
fixture body (A).
Slide the metal ring (DD) into the glass
shade (B) and onto the shade screws
(CC).
Secure the glass shade (B) to the fixture
body (A) by aligning the two shade screws
(CC) through the metal ring (DD).
Twist the metal ring (DD), and then
tightening the shade screws (CC).
Installation
5
FF
HH
GG
BB
A
CC
B
DD
