5
Installation
1
Installing the light bulbs
2
Attaching the fixture frame to the top
cover
□
Install two 60-Watt maximum, candelabra base
bulbs (sold separately) into the two sockets (E).
NOTE: You can use candelabra base LED equivalent
energy-saving bulbs that do not exceed 8 Watts each (sold
separately).
□
Align the fixture frame (G) under the top cover (D).
□
Use a Phillips screwdriver to screw the pan screws (F) into the
holes on the top cover (D). There is a hole on the left side of the
top cover (D), and a hole on the right side of the top cover (D).
3
Attaching the cross bar to the outlet
box
□
Screw the mounting screws (CC) into the cross bar (EE) so that
the threads face out.
□
Mount the cross bar (EE) to the outlet box (not included) using
the outlet box screws (BB).
□
Make sure the threads of the mounting screws (CC) are facing
out when the cross
bar (EE) is attached to the outlet box.
