11
Operation
6
Water inlet installation
Before using
After select program, process and water level, press
this button to start.
Press this button to pause during working, press again
will rework .
Can select one program from NORMAL,STRONG,SOFT, SPEEDY,ULTRASPIN
At the beginning of start, the process is NORMAL.
To control the washing machine is in
working state or waiting state.
When washing, the digital timer shows
At the beginning of start, if with FUZZY logic,
When trouble encountered, the digital time
shows trouble code.
the rest time of washing, unit is MIN.
The digital timer shows
--
.
Press this button to select HOT,COLD,WARM.
At the beginning of start, the process is COLD.
At the beginning of start, if with FUZZY logic and do not select water level, the digital timer
shows
- -
at this time, before press START/PAUSE, If select NORMAL or STRONG,
with fuzzy logic. When select SOFT, no fuzzy logic, the water level is
7
When
select speedy, no fuzzy logic, water level is
2
. If no WASH process, no fuzzy logic.
During wash (including rinse), if need to add water, press WATER LEVEL button to add
water, un-press will stop adding. Or PAUSE the washing machine and press WATER
LEVEL to select higher water level, then press START/PAUSE button, The washing
machine Will add the water to setting level automatically and continue working. If your
resetting water level is lower than present water level, the lowe r water
Level will valid in
next water inlet.
At the beginning of start, press WATER LEVEL to select water level, at this time, no fuzzy
logic function, you can select appropriate water level. According to your laundries quantity.
1-2 is low water level, 3-6 is middle water level,7-10 is high water level.
Automatically add water: during SOAK, WASH and RINSE process, if the washing
machine check the water level is lower than setting water level, The washing machine
will pause and add water to setting water level automatically.
Tap selection
Suitable tap
Not suitable tap
1. Swing the inlet hose gently to confirm if it is
fastened.
2. After installation,open the tap and check if
it leaks.
3. Do not bend the inlet hose with overstrain.
4. Before each usage,check the connection
between inlet hose connector and the tap.
Make sure they are firmly fitted to prevent
dropping from improper installation position.
Inlet valve connector
Inlet hose nut
Water absorption cushion
Connect the inlet hose with the washing machine
Check the connection between inlet
hose connector and the tap
1. Do not take off the water absorption cushion. Please
check if the cushion is dropped or damaged before
each usage. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve connector.
3. Fasten the inlet hose nut and swing it gently to make
sure if it is suitable.
º Ï Ê Ê µ Ä Ë ® Á ú Í ·
The front end should be longer than 10mm. The tap exit end
face should be flat and smooth, if not file it to avoid leakage
Cautions:
W
hen install the washing machine, please use the new hose assy along with the washing
machine, old hose assy can not reuse.
Содержание HCWP1605
Страница 1: ......