Note: You will need a screwdriver to complete the assembly.
Step 1: Insert the handle (A) into the hole of the chimney cover (B). Attach the handle (A) to the chimney
cover (B) using a nut (CC). Securely tighten with an M6 wrench (not included).
Step 2: Attach the stands (G) to the tray (H) using M6
×
12mm bolts (AA). Hand tighten the bolts (AA). Do
not over-tighten.
Step 3: Attach the chimney bottom (F) to the stand (G) using M6
×
12mm bolts (AA). Securely tighten each
bolt (AA) with a Philips screwdriver (not included).