OPERATING INSTRUCTIONS
Hair Clipper
WARNING:
Switch off the device before replacing or changing the attachments
NOTES:
The hair to be dressed must be dry.
NOTES:
The cutting length may deviate depending on the cutting angle. Please
start with a comb attachment with a longer cutting length and then, in the
course of cutting process, use shorter cutting lengths step by step
.
1. Select the desired hair clipper attachemnt.
2. Attach the attachment to the main unit. Push on the attachment by inserting
the bottom bracket of the attachemnt into the rail of the main body then
press the upper part of th attachment onto the device until it audibly and
firmly locks into place.
3. Insert comb attachments, press carefully over the hair trimmer head to the
bottom end of the comb attachemnt until it locks into place.
4. Turn on the hair clipper.
5. Start by cutting hair in nectk or on the sides and cut towards the centre of
the head. Then, cut the front section fo the hair towards the centre of the
head.
6. Hold the device so the the comb attachment rests flat on the head. Move the
device evenly throught the hair.
7. If possible, cut against direction of hair growth.
8. In order to catch all the hair, move teh device several times throught the
same section of the hair.
9. Comb the hair repeatedly and well.
10. To withdraw hold the hair trimmer with both hands and press the blades
out with your thumb and support the blades at back to avoid falling.
