ASSEMBLY
1 Assembling the Back Cover and Side Covers to House
Fasten the Back Cover and both Side Covers to the House (E) at the
connecting loops with the Plastic Ties (L).
2 Attaching the Support Bracket to the House
Hang two connecting rods at the top of the Support Bracket (F) into the
matching holes on the back top of the House (E) and fasten them with
Cotter Pin (J). Insert the metal swivel connecting rod attached to the
middle of the Support Bracket into the matching hole on the middle of
the House (E) then fasten with Cotter Pin.
3 Assembling the Left & Right Fence
Insert the connecting rods on the Left & Right Fence (G&H) into the
matching holes on the front of the House (E).
4 Assembling the Left Spire and Lower Section of Right
Spire
Insert the connecting rods at the bottom of the Left Spire (A) and the Lower
Section of the Right Spire (D) into the matching holes on the top of the
House (E).
5 Assembling the Chimney and Securing the Spires
Insert the connecting rods on the bottom of the Chimney (I) into the
matching holes at the top of the House (E). Fasten the Left Spire and
the Lower Section of the Right Spire at the connecting loop with the
Plastic Ties (L).
6 Assembling the Middle Section and Roof of the Right Spire
Insert the connecting rods on the bottom of the Middle Section of Right
Spire (C) into the matching holes on the top of the Lower Section of
Right Spire (D) and fasten them at the connecting loops with the Plastic
Ties (L).
7 Assembling
the
Roof of Right Spire
Insert the connecting rods on the bottom of the Roof of Right Spire
(B) into the matching holes on the top of the Middle Section of the
Right Spire Upper (C). Fasten at the connecting loops with Plastic
Ties (L).
8 Assembling the Ground Stakes
Insert the Ground Stakes (K) over the metal frame at the 4 corners of
the House then into the Ground.
