ASSEMBLY
1 Assembling the Head and the Body Sections
Align the Front and Back Sections of Body (D & E) and the Front
and Back Sections of the Head (B & C) with each other then insert
the connecting rods of one half into holes on the other half.
Secure together at the connecting loops with the Plastic Ties (P).
2 Assembling the Legs to the Base Stand
Stack the Support Poles (I & J) into the Base Stand (M) with the
tapered end up. Attach the Legs to the Base Stand by connecting
the poles in the Legs to the top of the Support Poles. Secure with
locking pin.
3 Assembling the Head to Body then to Legs
Hang the connecting hooks on the lower front of Head onto the front
middle top of the Body. Fasten them together at the connecting loops
with the Plastic Ties (P).
4 Attach Stabilizing Bars to the Body
Attach Stabilizing Bars (K & L) together and lock with securing pin.
Connect the lower end of the Stabilizing Bar to the connecting hole on
the back middle of the Base Stand. Secure with Cotter Pin (N). Connect
the upper end of the Stabilizing Bar to the back side of the Body. Secure
with Cotter Pin.
5 Assembling the Hat and Arms
Attach the connecting rods on the bottom of the Hat (A) into the holes
on top of the Head. Insert the connecting rods on the Arms (F & G) into
the matching holes on Body and fasten them together at the connecting
loops with the Plastic Ties (P).
6 Securing the Scarecrow to the Ground
Insert Ground Stakes (O) over the metal Base Stand then into the
Ground.
