Assembly
Assembling the Scarecrow
Step 1. Align the two halves of Body (B) with each other and insert the connecting rod on one half
into the other half then fasten with the Plastic Ties (I). (FIG.1)
Step 2. Align the two Halves of Head (A) with each other and insert the connecting rod on one half
into the other half then fasten with the Plastic Ties (I). Insert the connecting rod at base of
Head into the head into the connecting holes at the top of the Body (B) then fasten with
Plastic Ties (I). (FIG.2)
Step 3. Align the two Halves of Upper Legs (D) with each other and insert the connecting rod on
one half into the other half. Insert the connecting rods on the bottom of Body (B) into the
connecting holes at the top of the Upper Legs (D). Fasten all with Plastic Ties (I). (FIG.3)
Step 4. Insert the connecting rods on the Lower Legs (E) into the holes of the Upper Legs (D) and
fasten with the Plastic Ties (I). (FIG.4)
Step 5. Insert the Coated Pipe (F) into the Round Base Stand (G) with the tapered end upwards.
Connect the Pole to the assembly hole at the bottom of the Upper Legs (D). Pose the
Scarecrow with Arms Up. (FIG.5)
Step 6. Wrap the Scarf (C) around the neck of the Scarecrow. (FIG.6)
Step 7. Insert Ground Stakes (H) into the ground at the base of the Scarecrow. (FIG.7)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 4.8 Watts
(0.04Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
FIG.3
FIG.4
FIG.6
FIG.7
FIG.5
