Sensor / D
étec
teur
5.9 V
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver, Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help.
CAN ICES-3 (B)
OPERATION INSTRUCTIONS:
1. Plug the UL power adapter into a standard power outlet and adjust the settings on the Function Control Box,
located on the (C) Function Control Box Frame , as desired.
2.
Settings:
Sensor : This setting allows the item to only be activated when the infra-red (IR) sensor is activated. The item will operate for one audio-cycle with each
sensor activation. The Infra-red (IR) sensor will activate when someone comes within an 80-degree angle from left-to-right, as well as from above
and below. The infra-red (IR) sensor has a range of up to 2 meters/6.56 feet.
/OFF/Try-Me: This setting allows the item to be activated only if triggered by using a Step Here Try-Me Activation Pad (Not Included).
The item will operate for one audio cycle with each Try-Me activation. Refer to Assembly Instructions Step 6 for further details.
I / ON
: This setting will continually operate the lights, sound, and animation of the item.
: Raise or lower the volume using the volume control turn dial, turn and click all the way down to turn the volume off.
5/5
IR Sensor Location
Ensure that the sensor remains exposed
through the hole located on the finger of
(L-1) Book for proper function.
STEP 10
Try me / Essaie
-moi / P
ruébame
