STEP 3
STEP 4
STEP 5
2/3
J
D
G
F
I
Attach the (
F) Shoulder Support
into the slots located on the top of the (D) Torso Frame
as shown in
Figure 1
.
Set the (G) Head onto the (D) Torso Frame by sliding the forked-hook into the “neck” slot housing on
the
(D) Torso Frame
as shown in Figure 2
.
Connect the cables from the (G) Head to small function box loacted the (D) Torso Frame
as shown in
Figure 3
.
Lower the (H) Costume down over the Head (G)
&
assembled (F) Shoulder Support
as shown in
Figure 1
.
Secure the hook & loop closures at the neck and inside collar
as shown in Figure 2
.
Slide the (I) Right Arm up through the Right sleeve of the (H) Costume and slide the forked-hook into
the right “shoulder” slot housing on the (D) Torso Frame
as shown in Figure 1
.
Slide the (J) Left Arm up through the Left sleeve of the (H) Costume and slide the forked-hook into
the left “shoulder” slot housing on the (D) Torso Frame
as shown in Figure 2
.
Secure the hook & loop closures at both wrists as shown in Figures 3.&4.
Make sure the circles of Arm joints don’t overlap and attach the arms from the front of the Witch
as
shown in Figure 5
.
STEP 6
H
H
K
L
Back
Front
Back
Front
Locate the hook & loop closures at the back of (H) Costume as shown in Figure 1.
Set the (K) Cloak onto the shoulder of witch. Secure under the chin and at the back with the hook
and loop closures as shown in Figure 2.
Attach the (L) Hat onto the (G) Head, and secure the hats with the hook & loop closures at the
forehead and inside of the hats as shown in Figure 3.
H
K
G
L
G
H
F
G
G
D
D
1
2
3
G
H
D
H
2
1
G
D
J
I
D
I
J
1
3
1
3
2
2
4
5
