ASSEMBLY
1 Assembling the Half of Head & Front Body
Align the two Halves of Head & Front Body (B) with each other then
insert the connecting rods on one half into the connecting holes on
the other half and fasten together at the connecting loops with
Plastic Ties (I).
2 Assembling the Rear Body
Align the two Halves of Rear Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with Plastic Ties (I).
3 Attach the Head & Front Body to Rear Body
Insert the connecting rods on the front edge Rear Body (C) into the
connecting holes on the back edge of the Head & Front Body (B) and
fasten together at the connecting loops with Plastic Ties (I).
4 Securing the Tail to the Body
Insert the connecting rod on Tail (D) into the connecting holes on the end
of the Rear Body (C) and fasten together at the connecting loops with
Plastic Ties (I).
5 Assembling the Ventral Fins to the Body
Insert the connecting rods on each Ventral Fin (F) into the connecting
holes on the sides of the Front Body (B) and fasten together over the
metal frames with Plastic Ties (I).
6 Assembling the Dorsal Fin to the Body
Insert the connecting rods on the bottom of the Dorsal Fin (E) into the
matching connecting holes on the top of Front Body (B) and fasten
together over the metal frames with Plastic Ties (I).
7 Assembling the Hat to the top of the Head
Insert the connecting rod on the front bottom edge of the Hat (A) into
the matching connecting hole at the top of Head (B).
8 Assembling the Light String and Ground Stakes
Wrap the Light String around the Body of the Shark for your desired look
and secure with Plastic Ties (K) over the metal frame. Insert the clip on
the Ground Stakes (J) over the metal base connecting loops then into
the ground firmly.
I
B
C
I
G
C
C
I
B
C
D
I
F
I
B
F
B
I
E
A
B
J
I
