Assemble the connecting rod on the bottom of the Santa Head (A) into the hole at the top of the Tree and slightly form the branches to your desired look.
ASSEMBLY
1 Assembling the Santa Head
Insert the connecting rods on one half of the Santa Head (A) into the
matching holes on the other Half of Santa Head (A) and fasten them
together at the connection loops with Plastic Tie (G)
2 Assembling the Base Stand
Pull apart the Base Stand (E) so the legs are separated. Secure the
Stand in right position with the Large Twist Screws (F) on the outside
of the metal tab.
3 Assembling the Bottom Section to the Base Stand
Insert the Bottom Section of the Tree (D) into the hole at the top of
the Base Stand (E) and secure with the Large Twist Screws (F).
4 Assembling the Middle Section to the Bottom Section of
the Tree
Insert the Middle Section (C) to the hole at the top of the Bottom Section (D)
of the Tree.
5 Assembling the Top Section to the Middle Section of
the Tree
Insert the bottom of the Top Section (B) to the hole on the top of the
Middle Section (C) of the Tree.
6 Assembling the Santa Head to the Tree and slightly form the
branches
Assemble the connecting rod on the bottom of the Santa Head (A) into
the hole at the top of the Tree and slightly form the branches to your
desired look.
