Assembly
Assembling the Fluffy Sitting Dog
Step1. Align two halves of Body (C) and insert the rod on one half into the matching hole on the other
Half. Align the two halves of Head (A) and insert the rod on one Half into the matching hole in the other
Half then fasten together with the Plastic Ties (J). (FIG.1)
Step 2. Insert the metal rods attached to the each Leg (D&E) into the matching holes on the underside
of the Body (C). Insert the Head (A) into the matching holes in the Body (C). Insert the Ears (B) into the
matching holes in the Head (A).
Then insert the Tail (E) into the matching holes in the rear of the Body. (FIG.2)
Step 3. Secure the Dog to the ground with the Ground Stakes (G). (FIG.3)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 40.8 Watts
(0.34Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
A
C
B
F
D
E
FIG.3
FIG.1
FIG.2
