ASSEMBLY
1 Assembling the Head and Body
Insert the connecting rods on the Lower Half of Head (B) and Lower
Half of Body (C) into the connecting holes on the Upper Half of Head
and Body (D) then fasten together at the connecting loops with the
Bolt & Wing Nut (O).
2 Assembling the Body to the Base Stand
Insert the connecting rod on Base Stand (N) into the bottom of the
Stabilizing Bar (M) and lock together with the connecting pin. Insert the
connecting rods at the top of the Stabilizing Bar (M) into the connecting
holes at the bottom of the Head and Body (D) and fasten together at the
connecting loops with Plastic Tie (R).
3 Assembling the Legs to the Body
Insert the connecting rods at the end of each Leg (F,G,H,I,J,K) into the
matching connecting holes on the Body (D) then fasten together at the
connecting loops with the Bolt & WingNuts (O).
4 Assembling the Front Legs to the Head
Insert the connecting rods on the end of the Front Legs (E,L) into the
connecting holes at the bottom of Lower Head (B) then fasten together
at the connecting loops with the Bolt & Wing Nuts (O).
5 Assembling the Pincers to the Head
Insert connecting the rods on the end of the Pincers (A) into the
connecting holes at the front of the Upper Half of Head and Body (D).
6 Assembling the Ground Stakes
Insert Ground Stakes (S) over the metal frame loop on each Leg then into
the ground firmly.
D
O
B
C
M
D
N
R
F
G
J
H
I
K
O
D
E
O
L
B
A
D
S
