background image

TM

Christmas Tree

Model: TG90M3BB7D00

Sku # 1001 625 734

Step 1.

 

Grasp the power adapter or power cord plug, 

               and than unplug from the power outlet. 
               Do not pull the power cord.

LAMP REPLACEMENT

Step 2. 

Lift up lamp lock tab, then pull the 

               lamp and plastic lamp base 
               straight out of the lamp-holder.

Step 3.

 

Replace with a new spare lamp 

               provided with this product.

(Reference figure only)

This tree package includes hinge pins, washers and bulbs for any 

replacement or repair that you need to perform on your tree. If 

extra parts are needed, contact the Customer Service Team at 

1-877-527-0313 between the hours of 8 am and 5 pm EST, 

Monday through Friday.

Repairing Loose Hinges

Step 1.

 Place the branch into the slot of the bracket

Step 2.

 Insert a new hinge pin through the holes of the bracket 

               and secure with a washer.

Maintenance

Spare parts

Turning on the tree

NOTE: 

If some bulbs do not light or flicker, search for any loose  

plugs and/or broken, loose, or missing bulbs. Replace bulbs 

promptly with the replacement bulbs provided in order to  

maintain the performance and life expectancy of your tree. 

Step 1. 

 Connect the light strings of the tree together and  plug 

                the adapter into a wall outlet.  

Step 2. 

 If the tree comes with a foot pedal, step on the On/Off                 

                button.  

Operation

1. Before using or reusing, inspect product carefully. Discard any 

products that have cut, damaged or frayed  wire insulation or 
cords, cracks in the lampholders or enclosures, loose 
connections, or exposed copper wire.

2. Before disassembling the tree, unplug the tree and remove all 

ornaments and decorations.

3. Gently lift the tree top straight up to remove from the center 

section and fold all branches towards the pole.

4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from 

wherever it is placed, including tree, branches, or bushes, to 
avoid anyundue strain or stress on the product conductors, 
connections, and wires. Cover the 

    protective cap on the poles to avoid 
    damaging the internal parts.
6. When not in use, store neatly in a cool, 
    dry location protected from sunlight.

Use and Care Instructions

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

Remote Control Instructions

Simply press the selector button to select from the following light functions: 

(1) WARM WHITE - MULTI: FADING    (2) WARM WHITE: FADING
(3) WARM WHITE - MULTI: ALTERNATING    (4) WARM WHITE: STEADY
(5) WARM WHITE - MULTI: SLOW FADING    (6) MULTI: STEADY
(7) MULTI: FADING    (8) COMBINATION

1. Remove the insulation tab of the remote control.
2. Press either selector button and wait for a second to enjoy light 
    effects in the following sequence (see 

DUAL COLOR 

     LIGHT CONTROLLER & REMOTE CONTROL

).

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

2. Replace the used battery with a new CR2032 button cell battery 

    (not included). Make sure that the battery is installed with the 

    correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Selector Button

Remote 

Control

Light 

Controller

Cover

Battery

CR2032

Insulation Tab

WARNING

1. Dispose used battery properly. observe local regulations regarding 

disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).
3. This product is powered by a lithium battery. Due to their small size, 

lithium batteries can easily be swallowed by children. Ingestion of such 
batteries has been known to cause death.

4. This product contains a lithium battery which if swallowed has been 

known to cause death.

5. Do not expose light set to moisture.
6. Remove batteries when not used for an extended period of time, or 

when depleted.

7. Clean the battery contacts prior to battery installation.
8. The external flexible cable or cord of this luminaire cannot be replaced; 

If the cord is damaged, the luminaire shall be destroyed.

9. Dispose of used batteries properly by following directions on batteries.
10. Use only CR2032 batteries for the remote controller.
11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

Отзывы: